MGPC Sustainability Blog

If you received an offer like that from your local gas station, wouldn’t you be interested?  I know I would be.

Well, how about an offer like that on your electricity service? That would make sense too, right?

So if a company introduced an offer that was even stronger than that, it would be a no-brainer.

So, while we don’t offer free, or even discounted gas, what Maryland Green Power Co. can do for your company is:

1) Reduce your energy costs by at least 30%,

2) Spread out the cost of improvements over time so that money saved is greater than money invested,

3) Guarantee a 4-year payback on equipment or you get the equipment for free!

Example:

If you electricity bill is $ 1,000 per month and we guaranteed you savings of 30%, then you would save $ 300 per month.

If the cost of equipment financed over 4 years cost $ 270 per month, then you would be getting upgraded, energy saving equipment and immediately realize a $ 40.00 per month profit! That’s like getting the energy saving equipment for free!

Better yet, at the end of 4 years, you have paid off the equipment financing and the full $ 300 per month energy savings is yours year after year.

And if you don’t save as much as we claimed? Then, Enigin pays back the full equipment cost to you! There’s no risk and nothing but upside.

For more information on Enigin systems and EnergyMaps, please contact:

Maryland Green Power Co.

1-443-864-3072

Or, fill out our free trial request at:

http://www.marylandgreenpower.com

Ref: What if you were paid to install energy saving products?

..

How does iMEC work?

AC induction motors consume more than half of all the worlds’
energy! Unfortunately, motors lack the intelligence to address
three key problems that lead to massive energy wastage,
unnecessary carbon emissions and undue wear and tear:

1) Fixed speed motor driven applications like escalators cannot
intelligently adjust their torque output to match load changes
leading to excess energy consumption.

2) Motors that drive applications like pumps & fans cannot
intelligently adjust their speed to match load changes and as such
consume more power than they need.

3) When starting, a motor develops more torque than is
required at full speed. This high inrush of current can lead to
mechanical breakdown and peak demand penalties. To avoid the
problems associated with starting, motors are often left running
continuously even when they are not being used which leads to
huge energy waste.

The iMEC solution effortlessly addresses all of these problems
by introducing intelligence to your existing systems:

1) iMEC can be applied to fixed speed applications and will
dynamically adjust the torque output to meet load requirement
without altering the speed (see fig. 1). This leads to substantial
savings and is ideal for applications like escalators and many others
which run at no/low load for long periods of time. In the right
applications, payback is typically under two years!

2) iMEC can be specified to intelligently adjust the speed of
your motors to match their variable loading so your motors only
consume the power they need. This is a vast improvement over
traditional control methods (see fig. 2). A mere 20% reduction in
speed can lead to energy savings of up to 50%!

3) iMEC provides a smooth, step-less acceleration (soft start) of
your motors (see fig. 3). This dramatically reduces wear & tear on
your system and helps you to avoid peak demand penalties. With
a controlled start in place your motors can now be switched off
without the fears of re-starting and iMEC can be programmed to
perform this function automatically. Auto Switch Off delivers 100%
energy savings!

Use iMEC to get your motors under control – it’s a great way to cut your costs, boost your profits and ‘do your bit’ in the fight against climate change

The No-Brainer Investment in Energy Savings Pays Big Dividends!

If you were offered a product which would save you more money each month than you had to pay to finance it, you would feel that you were practically getting the product for free, or even better, being paid to get the product!

This will be true for anyone with an electric bill over $ 700 per month, since the Enigin EnergyMaps program can save you approximately 20% even before implementing load-side energy efficiency solutions. That savings will be higher than the approximately $ 140 per month cost of the lease-to-own EnergyMaps starter package. This is really the first step in anyone’s energy savings program.

EnergyMaps, recently introduced in the U.K., is enjoying rapid growth there as evidenced by this article describing its popularity with printers, among others:

Printweek Article on Enigin Energy Maps

We at Maryland Green Power Co. are excited to announce that we have been selected as Enigin’s exclusive partner in the U.S. Mid-Atlantic region with the ability to operate in other parts of the United States as well. We are now ready to introduce this innovative approach to energy savings to the United States.

While Enigin’s solutions include technological innovations such as the ACES Air Conditioner Energy Saver, and iMEC Motor Energy Efficiency Controller, what we appreciate about the EnergyMaps system is its unique people-oriented approach. EnergyMaps utilizes the Eniscope as a metering device which translates the cryptic electrical data gathered from your facility into language and graphics a layman can understand, and displays it on any Internet-connected computer in your facility, and optionally, to points outside of your facility, at no extra charge per station. In other words, since there is no license fee for the display software, it can be duplicated as much as needed. The included iPOD Touch with wireless Internet capability gives your operators the additional benefit of being able to walk around the facility switching devices on and off and viewing the impact on the iPOD’s screen immediately.

This simplicity allows employees to understand the impact of their actions or inactions within their workplace. However, the remarkable aspect is the team mentality which is developed and the efficacy of the incentive plans.

The team is developed with the help of the PeopleMaps tool, which gauges how each person fits in within their organization, and finds the most appropriate “point-man” to help your organization meet its energy-saving targets. (Please take a free trial of the powerful PeopleMaps tool - the test takes 8 minutes and will provide a surprising accurate, if not entertaining impression of you, which you might want to hide from friends and family lest they say “I told you so!”)

Click here for Free PeopleMaps trial

Now, with this information, your staff will know why the utility company is charging you a demand surcharge, and how to avoid it, or that leaving their computer monitors turned on all day even during their lunch break is costing you over $ 75 per monitor in added energy costs, not including the extra air conditioning needed to compensate for their heating.

Is that confusing, overwhelming and just too much to think about while running your operation? Yes, it is! But would you like to recover some of those costs if only you had the time? I imagine anybody would want those energy costs added back to their bottom line profits!

That’s why EnergyMaps will take that off your hands and let you run your business, but still reap the benefits of reduced facility expenses.

There are many more benefits obtained from this program, including increased employee retention and longer equipment life, but for now I think it is safe to say that the $ 140 per month is a great value for this program.

One last thought: The early adopters will receive a good deal of positive P.R. from our press releases which will focus on your efforts to go green. That free exposure and public good will might be worth something.

Of course, the early adopters would not feel safe unless we offered a FREE TRIAL INSTALLATION: We will provide one Eniscope to your facility for a free 2-week evaluation period to prove its benefits. After the 2 week period ends, you choose whether to return the Eniscope, or to pay for it and continue with the EnergyMaps program at our special lease-to-own finance rate starting at $ 140 per month!

To qualify for the free trial, please fill out the request form at:

Free EnergyMaps Trial