SAVE FROM 20-30% ON YOUR MONTHLY AIR CONDITIONING COSTS!

How does the AircoSaver work?

Air conditioning systems are usually dimensioned to cope with the extreme cooling demands of the few hottest days of the year (plus a safety margin). However, in most operational conditions, this maximum output is not required and the system is over-sized.

This is where an AircoSaver comes in. Its sensor-driven software algorithms are designed to detect thermodynamic saturation and to optimize the compressor accordingly. When over capacity is detected, AircoSaver switches the compressor off and avoids inefficient over-cooling (see diagram below).

The set room temperature is reached without the inefficient parts of the cooling cycle.This results in significant energy savings without compromising cooling comfort.

Benefits of an AircoSaver An AircoSaver adds state-of the art intelligence to air-conditioner systems and improves their energy efficiency.

It is a retrofit product to upgrade existing units which can be installed in approx. 15 minutes

Will this work on your air conditioner? Click the Call-Us button to your right to discuss your air conditioner or chiller.

Click Here to Buy Cool-n-Save at Near Wholesale Cost!

In an earlier article, we discussed how air conditioning works.  The important fact from that article is that a water cooling function, such as a cooling tower, increases the efficiency of the condenser to allow for more effective cooling. This is due to the fact that, as water evaporates, it absorbs a great deal of energy (heat) from the surrounding air, making the job of your air conditioner’s cooling coil that much easier.

Why Businesses Save More Energy on Major Appliances

(Image courtesy of: Bryant, Charles W., and Marshall Brain. “How Air Conditioners Work.” 01 April 2000. HowStuffWorks.com. <http://home.howstuffworks.com/ac.htm> 21 May 2008. Please visit their site for a terrific explanation of air conditioning and other systems.)

Even if you could afford a cooling tower, the neighbors would not be too happy about you installing one unless you had a few hundred acres of land in a remote area. The trick is in scaling down the high efficiency cooling systems, or at least the underlying technology, so that it is accessible for you and me.

Scaling Industrial HVAC Technology for the Small Consumer

Luckily, I have been researching, and installed at my own house an extremely affordable solution which utilizes that same principle, which is that the evaporation of water mist draws a large amount of energy from the air in the form of heat, allowing your air conditioner’s condensing coils to cool faster and pump that coolness into your house or small office. I was immediately impressed with the simplicity, and the fact the I installed the device in 15 minutes without using any tools whatsoever. Notice here that it is installed on a residential heat pump, and will work on almost any similar split system air conditioner or heat pump. The important factor is that the condenser (the outside portion of your air conditioning system) is upright and has a fan which blows air upwards through a grate. The top portion of the Cool-n-Save is glued onto the condenser and connected to your home’s outdoor water nozzle with the included plastic tubing. The included filter provides water without small particles which would clog the misters. The top of the Cool-n-Save base contains a paddle (flap) which moves upwards when air is blown from the condenser’s fan as shown above, opening a water valve which sends water down through three plastic tubes. Three misters send a cool, moist mist towards the condenser intake, cooling the ambient air by as much as 30 degrees Fahrenheit. Here we see the Cool-n-Save mister in action, spraying a super fine mist and using a tiny amount of water.

Proving Cool-n-Save Energy Savings

Cool-n-Save Energy Star

Although it is too early to give definitive figures on energy savings, and it will be difficult to compare month-to-month energy bills due to fluctuations in temperature and other variables, I can attest to its ability to reduce the load on my air conditioner and thus cool my home quicker than before. If nothing else, this product increases our comfort level on hot days. Instead of accepting my subjective opinions on the Cool-n-Save, you can download the Cool-n-Save Study by Tulane University for a comprehensive engineering analysis of the device. When in doubt, the Energy Star Partner seal should give you confidence:

Calculate Your Savings

According to Con Edison, the amount of energy used by your air conditioner is a function of outside temperature and thermostat settings, and will range from 50% – 80% of your total energy costs in the summer. How much did you calculate? We conservatively estimated $ 170 per month savings at our home. Would you think it would be fair if Cool-n-Save paid for itself in less than one summer? Before answering, consider other upgrade projects you have completed in your house. Have you installed new windows to improve insulation? The payback period for new windows can run over 10 years! For the Cool-n-Save, let’s use: 3 months x $ 170 savings per month = $ 510 savings in one summer! In our situation, Cool-n-Save is paying for itself in 2-3 weeks! Plus, we noticed our house reached a comfortably cool temperature much quicker, even on the hottest, most humid days! If the Cool-n-Save cost only $ 100.00, then it will be EARNING you money for 2-1/2 months of the summer, or even longer in hot, southern-US States. $ 170 savings per month x 2.5 months = $ 425 PROFIT you made this summer by using an energy efficiency device!

Buy Cool-n-Save Below Retail Price!

For Questions about Cool-n-Save, please contact us toll-free by clicking the Call Us button on the right margin.

You might also want to check out energy saving tips for some free or cheap energy and money saving solutions by clicking here!