Before Buying a Power Factor Controller Read This!
ENIGIN’S INTELLIGENT MOTOR ENERGY CONTROLLERS (iMEC)
How does iMEC work?
AC induction motors consume more than half of all the worlds’
energy! Unfortunately, motors lack the intelligence to address
three key problems that lead to massive energy wastage,
unnecessary carbon emissions and undue wear and tear:
1) Fixed speed motor driven applications like escalators cannot
intelligently adjust their torque output to match load changes
leading to excess energy consumption.
2) Motors that drive applications like pumps & fans cannot
intelligently adjust their speed to match load changes and as such
consume more power than they need.
3) When starting, a motor develops more torque than is
required at full speed. This high inrush of current can lead to
mechanical breakdown and peak demand penalties. To avoid the
problems associated with starting, motors are often left running
continuously even when they are not being used which leads to
huge energy waste.
The iMEC solution effortlessly addresses all of these problems
by introducing intelligence to your existing systems:
1) iMEC can be applied to fixed speed applications and will
dynamically adjust the torque output to meet load requirement
without altering the speed (see fig. 1). This leads to substantial
savings and is ideal for applications like escalators and many others
which run at no/low load for long periods of time. In the right
applications, payback is typically under two years!
2) iMEC can be specified to intelligently adjust the speed of
your motors to match their variable loading so your motors only
consume the power they need. This is a vast improvement over
traditional control methods (see fig. 2). A mere 20% reduction in
speed can lead to energy savings of up to 50%!
3) iMEC provides a smooth, step-less acceleration (soft start) of
your motors (see fig. 3). This dramatically reduces wear & tear on
your system and helps you to avoid peak demand penalties. With
a controlled start in place your motors can now be switched off
without the fears of re-starting and iMEC can be programmed to
perform this function automatically. Auto Switch Off delivers 100%
energy savings!
Use iMEC to get your motors under control – it’s a great way to cut your costs, boost your profits and ‘do your bit’ in the fight against climate change
Tags: energy maps, energymaps, enigin, fixed speed motor controller, imec, inductive load, kvar, motor controller, motor controls, motor soft starter, power conditioner, power factor controller, power save 1200, power save 3200, power save 3400, power-save, powersave, powersave1200, ps1200, ps3200, ps3400, soft starter
June 19th, 2008 at 12:09 pm
Note the difference between a capacitor-based power factor correction system and a motor controller:
Capacitors are fixed and cannot compensate for varying degrees of inductance.
Motor controllers dynamically adjust response using a microprocessor-based system.
We will evaluate your facility for free and advise which is the best motor control solution for your needs. We can supply you with Enigin fixed-speed motor controllers, torque controllers, soft-starters, and a multitude of other solutions.
Why buy a one-size fits all solution when you can get customized energy saving equipment?
If interested in Enigin Motor Controllers (iMEC) as supplied by Enigin Partner Maryland Green Power Co., please contact us at: 443-864-3072.
July 4th, 2008 at 7:51 am
I’m very much interested to start a business.
Do you have a marketing tool on how to sell the product fast?
July 4th, 2008 at 7:57 am
Do you have a distibutor in the Philippines?
July 4th, 2008 at 9:51 am
Dear Mr. Cruz,
Please send me your complete contact information and I will send it to the company for consideration.
Please email:
partnerships @ marylandgreenpower.com
Regards,
Dennis Meizys
Maryland Green Power Co.
+1-443-864-3072
October 3rd, 2008 at 2:21 pm
I am a homeowner with an irrigation well. I use a 240vac 1hp submersible pump for 10 hrs/day/ for 6mo/yr. Irrigation pressure varries from 30psi @ 15gpm to 60psi @ 10gpm.
Will this technology be cost efficoent to apply in this situation?
October 6th, 2008 at 1:07 pm
While it would be helpful to know how much time is spent pumping at which rate, and how many start / stops occur per day. If you don’t know, we can provide a data logger for as little as $ 100.00. The data will upload into your computer as an Excel file, which you can email to us.
I am including a sample analysis using some assumptions on your loading.
It would also be useful to know your electricity rate, but for this purpose we will use Baltimore Gas & Electric’s retail rate of 15 cents per kWH.
I would be glad to change the analysis to match your actual data, so please contact us for additional details at: 443-864-3072.
The sample report shows the assumed loading distribution. I am assuming your pump is 97% efficient.
According to the Emerson Electric payback calculator, a motor controller would pay for itself in 2-1/2 years.
Please see download sample report from:
http://www.marylandgreenpower.com/irrigationwellpump.pdf